Belt Cleaning Systems
REMACLEAN PUR-F5
Conveyor belt cleaning system with a scraper consisting of polyurethane segments and a lever tensioning system with a compression spring for cleaning the conveyor belt load-bearing side at the head pulley. The individual polyurethane segments are permanently attached to the support. Thanks to a special function, the segments can always move elastically. This allows the segments to contact the conveyor belt surface at the drum optimally and ensures effective and gentle cleaning. The entire scraper strip is exactly pretensioned at one or both sides by means of the lever tensioning unit.
- High cleaning efficiency through perfect adaptation of the polyurethane segments to the belt‘s surface
- Long service life through the use of highly wear-resistant polyurethane
- Easily fitted and adjusted, low-maintenance
- Each segment is mounted to the system carrier with a quick-tensioning fastener
- Consistent and ideal contact pressure; easily adjustable and, through the length of the cylinder spring, easily definable; a pretension indicator is provided
- Up to a belt width of 1 400 mm pretensioning occurs from only one side
- PUR segments are also available in the natural colour white
- Stainless steel system carrier available
- Segment width of 100 mm
- For belt widths up to 1 600 mm and pulley diameters from 240 up to 800 mm
- Designed for the highest loads with temperature ranges of -40°C to +60°C and belt speeds up to 4.0 m/s
Universally applicable as a pre-cleaner or main cleaner for many types of materials such as sand, gravel, hard coal, lignite, ores, sinter, cement and in the chemical industry.
| Belt width | Between 500mm and 1400mm |
