• Up to 96% Aluminium oxide tile material provide extreme wear resistance.
• Rubber compound blended with CN polymers provide outstanding adhesion to ceramic tiles, rubber and metal.
• Buffed CN bonding layer and buffed edges for optimum cold vulcanised adhesion to the pulley.
• Low sulphur rubber makes rubber hardness stable with age.
• Ceramic tiles bonded to rubber on 5 sides to resist better tile cracking and pull out.
• Can be supplied in cut to size strips with rubber ends to suit customer preference.
• Dimpled tiles for increased grip on drive pulleys and smooth tiles to protect non drive pulleys from damaging the belt cover.
• Can be hot vulcanised to the pulley to achieve best bonding to metal pulley shell.
• Cutting sipes allow adjustment of strip width to suit pulley diameter.
• Supplied in long rolls up to 50m to reduce waste and be more cost effective and reduce stock requirement quantity as one roll fits all pulley widths.

Elastotec Ceramic Lagging can be applied to conveyor drive, tail, snub, bend or take-up pulleys when there’s a requirement for more grip than what Rubber Lagging provides or longer service life as a result of higher wear resistance than rubber. Ceramic Lagging is used for pulleys operating under extreme conditions. It is suitable for wet, clay-containing, muddy and abrasive materials. Also for belts under very high tension. Especially suitable for drive pulleys subject to extreme wear to eliminate slippage.