The REMAWELL base belt therefore contains cross stabilised plies in the top and bottom cover in addition to conventional multiply carcass. Their use ensures a high lateral rigidity of the sidewall belts and thus minimum lateral sagging when running around the deflection wheels or on the stub rollers.

Due to its wear resistant properties and high resistance against ozone, the rubber cover gives the greatest possible service life.

DBP REMAWELL belts are designed and customised individually for each application. The components needed to manufacture the DBP RemaWELL belts are available ex-warehouse in many different sizes.

DBP REMAWELL special conveyor belts permit the steeply inclined or vertical transport of all kinds of bulk material. The components are: the base belt, sidewalls and cleats, which define a constant transport volume and thus ensure a reliable transport of material even if the conveyor routing is skewed.

BENEFITS

• Once loaded the material is contained within the belt from the feed point right up to the discharge. This results in less product degradation caused by multiple transfer stations.
• There are no transfer points in the system. This results in a reduction of spillage and also dust control.
• The ability to conveyor through steep angles up to 90° means high utilisation of space.
  With vertical applications, the reduced number of moving parts results in quieter running and reduced maintenance requirements.
• High adhesion values of cleats and sidewalls, achieved through cold bonding with high-quality REMA TIP TOP bonding system or by hot vulcanization.
• Due to its wear resistant properties and high resistance against ozone, the rubber cover gives the greatest possible service life.
  Sidewalls up to max. 400 mm and cleats up to max.
• 360 mm available upon request.